TROUBLESHOOTING

Check here before contacting customer service

Issue source

Symptom

Solution

 

Multiple FIPS codes are

Make sure your radio location

Main unit - Radio

stored, but radio

mode is set to MULTIPLE option

responds only to alerts

 

 

 

 

for one area

 

channel

Cannot change the C° to

F° and back

Data does not match data on the main unit

channel

Press “RESET” after setting C/F

Initiate manual sensor search (Press and hold DOWN ( ▼) button on the Weather Station control panel

 

 

1Move unit close to the window as

 

 

it lost NOAA reception

 

CHECK OP message is

2. Make sure when during the

Main unit - Radio

SAME radio programming you

displayed

 

selected “SINGLE” or “MULTIPLE”

 

 

 

 

location and completed counties

 

 

programming

 

WEATHER/SNOOZE is

Make sure the telescopic antenna

Main unit - Radio

pressed, but there is no

is fully extended and the radio is

broadcast

set to the NOAA channel in your

 

 

 

area

 

Radio did not receive the

Enable the TEST alert in your

Main unit - Radio

TEST signal from NOAA

radio, as it is disabled by default

 

on Wednesday

 

Main unit - Weather

US Atomic Time signal is

Place unit by the window and

Station

not received

keep it there at least overnight

 

 

The weather data may vary

 

The weather readings

considerably due to different

Main unit - Weather

weather station are

environmental conditions and

different from the TV,

placement.

Station

radio or official weather

Check the placement tips included

 

 

reports

in this manual to site your weather

 

 

sensors in the best possible way.

Remote sensor

 

Check batteries

(anemometer, rain

 

 

 

Check location

gauge or

Cannot locate remote

 

temperature/humidity

 

Press and hold DOWN ( ▼)

sensor

sensor)

button on the Weather Station

 

 

 

control panel to search for the

 

 

signal form the remote sensor

 

Cannot change the

Press “RESET” after setting the

 

 

45

PRECAUTIONS

This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions:

Do not immerse the units in water.

Do not clean the units with abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuits.

Do not subject the product to excessive force, shock, dust, temperature, or humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts.

Do not tamper with the product’s internal components. Doing so will invalidate the warranty and may cause damage. The product contains no user-serviceable parts.

Use only fresh batteries. Do not mix new and old batteries.

Read the user's manual thoroughly before operating the product.

46

Page 23
Image 23
Honeywell TN924W user manual Troubleshooting, Precautions, Symptom Solution, WEATHER/SNOOZE is

TN924W specifications

The Honeywell TN924W is a state-of-the-art wireless thermostat designed to optimize home heating and cooling systems while ensuring energy efficiency and user convenience. This smart thermostat combines advanced technology with a user-friendly interface, making it an ideal choice for homeowners seeking to enhance their comfort while reducing energy consumption.

One of the main features of the TN924W is its Wi-Fi connectivity, allowing users to control their home temperature remotely through a smartphone app. The Honeywell Home app provides an intuitive platform for users to adjust heating and cooling schedules, monitor energy usage, and receive alerts, all from the convenience of their mobile devices. This capability not only increases comfort but also helps homeowners save on energy bills by enabling better management of heating and cooling patterns.

Another significant aspect of the TN924W is its compatibility with a wide range of heating and cooling systems. Whether it's a traditional HVAC setup, a heat pump, or a non-programmable system, the TN924W integrates seamlessly to deliver precise temperature control. This versatility ensures that users can enjoy the benefits of smart technology regardless of their existing system.

The TN924W also boasts a user-friendly touchscreen interface that simplifies programming and adjustments. With its clear display, users can easily navigate through the settings and customize their heating and cooling schedules. The thermostat supports multi-stage systems, allowing for more refined temperature management, which is particularly beneficial in larger homes or spaces with varying temperature needs.

In terms of energy-saving technology, the TN924W features Honeywell's Smart Response Technology. This innovative system anticipates heating and cooling needs based on various factors, such as current temperature, the time of day, and user habits, ensuring that the home is at the desired temperature when needed. Moreover, the thermostat can provide energy usage reports, empowering users with insights into their consumption patterns and opportunities for additional savings.

Overall, the Honeywell TN924W stands out as a leading choice for homeowners who prioritize comfort, convenience, and energy efficiency. Its advanced features, compatibility with diverse systems, and ease of use make it a valuable addition to any smart home.