2. HOW TO OPERATE
Charge Battery | Insert Battery | ON/OFF Switch | |||
2.1 |
| 2.2 |
| 2.3 |
|
Charge battery fully before first use. Fully discharged battery will take up to 3 hours to charge.
NOTE: See battery and charger manual for battery charging instructions.
Use only manufacturer’s supplied or recommended battery and charger.
Insert charged battery into battery cavity until latch is locked into place.
NOTE: When inserting and removing battery, ensure the switch is in the off position marked “O”.
To turn vacuum on, roll switch forward to position marked “I”.
Remove Battery
2.4
To remove and charge battery, pull on release lever located on end of battery and pull out gently.
2.7
BRUSH TOOL
Pull brushes forward on Crevice Tool to reveal Brush Tool.
Reverse steps
Integrated Tools
2.52.6
CREVICE TOOL | Pivot Crevice Tool up and |
Push Crevice Tool forward to | lock into place. |
release. |
|
Attachments*
*Available on BH50030 Hand Vac with Pet Tools.
WARNING: Remove battery before inserting or removing all attachment tools.
CAUTION: Not recommended for use on leather.
CAUTION: Not to be used for grooming a pet.
2.82.9
LiNXTM Power Head
Align pins on LiNXTM Power Head with small openings on nozzle and insert until securely in place. To utilize LiNXTM Power Head pivot feature, move handle in a vertical motion while cleaning. Pull out to remove.
ADDITIONAL PET TOOLS
Slide tool with Hoover® logo facing up into nozzle until locked securely in place. To remove, pull tool directly out.