INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
2.3T – 5.3T ASSEMBLY |
|
A S S E M B LY STEP 1 |
|
| HARDWARE BAG 1 CONTENTS : |
| BOLT (A) |
| 15 mm |
| Qty: 6 |
CONSOLE MAST | A Open HARDWARE BAG 1. |
| |
CONSOLE WIRES | B Connect CONSOLE WIRES. |
BOLTS (A) | |
| C Attach CONSOLE MASTS to BASE |
| FRAME using 6 BOLTS (A). |
| D Secure and tighten all bolts. |
| NOTE: Do not pinch the wires. |
A S S E M B LY STEP 2 |
|
A S S E M B LY STEP 3 |
|
| |
| HARDWARE BAG 3 CONTENTS : | BOLT (C) | |
BOLT (C) |
| 50 mm | |
|
| Qty: 2 | |
CONSOLE |
|
| |
CONSOLE WIRES | A Open HARDWARE BAG 3. | ||
B Connect CONSOLE WIRES. | |||
| |||
CONSOLE MAST | C Attach CONSOLE to CONSOLE | ||
| MASTS using 2 BOLTS (C). | ||
| D Secure and tighten bolts. | ||
| NOTE: Do not pinch the wires. | ||
A S S E M B LY STEP 4 |
|
| |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
CONSOLE |
CONSOLE SKIRT |
SCREWS (B) |
STEP D: UPSIDE DOWN VIEW OF CONSOLE
SCREWS (B)
CONSOLE SKIRT
CONSOLE SHELL SEAM
HARDWARE BAG 2 CONTENTS :
SCREW (B) 12 mm Qty: 4
AOpen HARDWARE BAG 2.
BPlace the console upside down on a padded surface.
CAttach the console skirt by partially inserting 2 SCREWS (B) in the two inner attachment holes.
DAlign the console skirt and console shell seam. Partially insert SCREW (B) and repeat for other side.
EFully tighten all screws.
BOLTS (A) |
HAND RAIL |
GRIP PULSE |
HAND RAILS |
BASE FRAME |
HARDWARE BAG 4 CONTENTS :
BOLT (A) 15 mm Qty: 4
3.3T & 5.3T models only:
AOpen HARDWARE BAG 4.
BAttach left and right HAND RAILS to GRIP PULSE HAND RAILS and BASE FRAME using 4 BOLTS (A).
NOTE: 2.3T models do not have hand rails and therefore will NOT include HARDWARE BAG 4 in the parts box.
TREADMILL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
7/17/06 11:43:05 AM |
