INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING GUIDELINES
A S S E M B LY STEP 7 |
|
|
|
| 6#3"$,&5 |
TEFLON WASHER (E) | ||
| FOOTPLATE TUBE | */4&35 |
|
| |
|
| 41"$&3 |
|
| 5)*4 |
| TEFLON WASHER (E) | %*3&$5*0/ |
|
| |
SPACER (F) |
| |
| 41"$&3 ' | |
U BRACKET |
|
|
LOWER LINK ARM |
|
|
| ||
BOLT (G) |
|
|
FLAT WASHER (C) |
|
|
PEDAL ARMS |
|
|
A ) Open HARDWARE BAG FOR STEP 7.
B)Align LOWER LINK ARM with U BRACKET.
CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right while positioning it on the U BRACKET.
C)Insert 2 TEFLON WASHERS (E) on left and right sides of FOOT PLATE TUBE before sliding SPACER (F) through U BRACKET and FOOTPLATE TUBE.
D)Insert FLAT WASHER (C) and BOLT (G) into outside end of FOOTPLATE TUBE to secure LOWER LINK ARM to
PEDAL ARM.
TROUBLESHOOTING LIMITED & MAINTENANCE WARRANTY
14
E) Repeat on other side.
HARDWARE BAG FOR STEP 7 CONTENTS :
SPLIT TEFLON WASHER (E) 28 mm
Qty: 4
SPACER (F) 70 mm axis Qty: 2
BOLT (G) | FLAT WASHER (C) |
15 mm | 35 mm |
Qty: 2 | Qty: 2 |
