Horizon Fitness E401 manual Assembly Step, You’Re Finished, A S S E M B Ly Step

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

CONDITIONING TROUBLESHOOTING HORIZON

GUIDELINES & MAINTENANCE WARRANTY

12

ASSEMBLY STEP 6
	UPPER HANDLEBAR
	BACK HANDLEBAR COVER
CONSOLE MAST
WATER BOTTLE HOLDER	LOWER HANDLEBAR
PRE-ATTACHED SCREWS
FRONT HANDLEBAR COVER

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

AAttach WATER BOTTLE CAGE to CONSOLE MAST using PRE ATTACHED SCREWS.

BSnap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS. Note the position of the snap tabs on the covers before snapping into position.

CRepeat on other side.

A S S E M B LY STEP 7
	NOTE: There is NO hardware bag for this step.
	All hardware is pre-installed.
CONSOLE WIRES	A	Attach the CONSOLE MAST wires to the
		CONSOLE.
PRE-ATTACHED	B	Carefully tuck the console wires into
SCREWS		the CONSOLE MAST before attaching the
CONSOLE		CONSOLE.
CONSOLE MAST	C	Attach CONSOLE to the CONSOLE MAST
		using the 4 PRE-ATTACHED SCREWS
		(screws will have to be removed from the
		console first).
AC ADAPTOR INPUT
		* Note: Be careful
		not to pinch
		any wires while
		installing the
		console.

Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect ADAPTOR to a power outlet.

YOU’RE FINISHED!

13

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

HORIZON TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

E401_Rev.1.5.indd 12-13 2/29/08 10:05:40 AM