Horizon Fitness E6 10, 11, ASSEMBLY STEP 5, ASSEMBLY STEP 4

BEFORE
YOU BEGIN
10
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN ELLIPTICAL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN ASSEMBLY
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
ASSEMBLY STEP 5
A) Open HARDWARE BAG FOR STEP 4.
B) Place WAVY WASHER (E) over the LINK ARM axle.
C) Slide the LINK ARM into the PEDAL ARM.
D) Attach FOOTPAD BRACKET to the LINK ARM with 3 BOLTS (B).
E) Repeat on other side.
LINK ARM WAVY WASHER (E)
BOLT (B)
FOOT PAD BRACKET
PEDAL ARM
BOLT (B)
15 mm
Qty: 6
WAVY WASHER (E)
29 mm
Qty: 2
FOOTPAD BRACKET
Qty: 2
HARDWARE BAG FOR STEP 4 CONTENTS :
ASSEMBLY STEP 4
RUBBER INSERTS
SCREWS (F)
FOOT PAD
LINK ARM
A) Open HARDWARE BAG FOR STEP 5.
B) Attach FOOTPAD to LINK ARM using 4 SCREWS (F).
C) Peel backing from RUBBER INSERT and carefully place on top of FOOTPAD.
D) Repeat on other side.
SCREW (F)
12 mm
Qty: 8
HARDWARE BAG FOR STEP 5 CONTENTS :
E6_Rev.1.2.indd 10-11 8/7/06 4:43:33 PM