BEFORE
YOU BEGIN
16
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN ELLIPTICAL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 9

PRE-ATTACHED SCREWS

CONSOLE

CONSOLE MAST

CONSOLE WIRES

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach the CONSOLE MAST wires to the CONSOLE wires.
B) Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.
DO NOT PINCH WIRES!
C) Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS.

Connect POWER CORD to the POWER CORD SOCKET, located at front of the main frame. Connect

POWER CORD to a power outlet. Flip the switch to the ON position. After a “beep”, the CONSOLE will

turn on.

YOU’RE FINISHED!