INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
UPPER HANDLEBAR
WATER BOTTLE CAGE
REMOTE RESISTANCE TOGGLES
SEAT BACK 
SEAT FRAME 
LOWER HANDLEBAR 
SEAT BASE 
SEAT GUIDERAIL
CAP 
BASE FRAME 
END CAP 
REAR STABILIZER TUBE 
CONSOLE
CONSOLE MAST
MAST BOOT
MAIN FRAME
FRONT STABILIZER TUBE
FRONT CAP |
PEDALS |
SEAT ADJUSTMENT LEVER
A S S E M B LY STEP 1
BASE FRAME 
REAR STABILIZER TUBE 
REAR END CAPS
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
LEVELER ADJUSTER 
LEVELER 
FRONT STABILIZER TUBE
MAIN FRAME 
BOLT (A)
SPRING WASHER (B) 
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
BIKE OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
TOOLS INCLUDED
cPhillips Screwdriver
c4mm L Wrench
c5mm L Wrench
c5mm T Wrench
c13/15mm Flat Wrench
PARTS INCLUDED
c 1 Console | c 1 Lower Handlebar | ||
c 1 Console Mast | c 1 Upper Handlebar | ||
c 1 Main Frame | c 5 Hardware Bags | ||
c 1 Base Frame | c 1 Rear Stabilizer | ||
c 1 | Front Stabilizer Tube | c 2 | Front End Caps |
c 2 | Pedals with Straps | c 2 | Rear End Caps |
c 1 Mast Boot | c 2 | Levelers and Adjusters | |
c 1 Seat Back | c 1 | Audio Adaptor Cable | |
c1 Seat Frame
c1 Water Bottle Holder
c1 Seat Base
WASHER (C)
SCREW (D) 
FRONT END CAP
AOpen HARDWARE BAG FOR STEP 1.
BSlide REAR END CAPS onto REAR STABILIZER TUBE.
CAttach 2 LEVELERS and LEVELER ADJUSTERS (found in the hardware box) to the bottom of the REAR STABILIZER TUBE and secure tightly.
DAttach the REAR STABILIZER TUBE to the BASE FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
ESlide FRONT END CAPS into FRONT STABILIZER TUBE with wheels facing forward and attach using 2 SCREWS (D) with provided Phillips screwdriver.
FAttach the FRONT STABILIZER TUBE to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 1 CONTENTS :
BIKE OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED
WARRANTY
If you have questions or if there are any missing parts, contact Customer Tech Support. If any warning decals become worn, damaged, or missing, they should be replaced.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.horizonfitness.com
BOLT (A) | SPRING WASHER (B) | WASHER (C) | SCREW (D) |
20 mm | 15.4 mm | 18 mm | 10 mm |
Qty: 8 | Qty: 8 | Qty: 8 | Qty: 2 |
LIMITED WARRANTY
7/17/08 3:03:51 PM |
