Horizon Fitness RC-30, RC-40 manual YOU Begin

INTRODUCTION IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

BIKE

OPERATION

CONDITIONING TROUBLESHOOTING LIMITED

GUIDELINES & MAINTENANCE WARRANTY



A S S E M B LY STEP 2

MAIN FRAME

BASE FRAME

CONNECT WIRES

WASHER (C)

SPRING WASHER (B)

BOLT (A)

A)Open HARDWARE BAG FOR STEP 2.

B)Connect wires from BASE FRAME to MAIN FRAME.

C)Slide MAIN FRAME into BASE FRAME.

D)Attach the BASE FRAME to the MAIN FRAME using 5 BOLTS (A), 5 SPRING WASHERS (B) and 5 WASHERS (C).

DO NOT PINCH WIRES!

HARDWARE BAG FOR STEP 2 CONTENTS :

BOLT (A)	SPRING WASHER (B)	WASHER (C)
20 mm	15.4 mm	18 mm
Qty: 5	Qty: 5	Qty: 5

A S S E M B LY STEP 3

LEFT PEDAL

LEFT CRANK ARM

RIGHT PEDAL

RIGHT CRANK ARM

Note: There is no hardware bag for this step.

A.Attach the Right Pedal onto the Right Crank Arm, tightening it clockwise with the provided 13mm/15mm Flat Wrench.

B.Attach the Left Pedal onto the Left Crank Arm, tightening it Counter-Clockwise with the provided 13mm/15mm Flat Wrench.

Note: The Left Crank Arm is reverse threaded so it is very important that it is tightened Counter-Clockwise. Tightening it the opposite way can damage the pedal or the crank arm or both.



IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

BIKE OPERATION

LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES

RC-30_RC-40_Rev.1.3.indd 8-9 7/11/07 1:34:12 PM