ASSEMBLY STEP 5
HARDWARE BAG 5 CONTENTS : |
| A) Open HARDWARE BAG 5. |
| SCREW (F) | |
| B) Place left CONSOLE TRIM PIECE | |
| 12 mm | |
| Qty: 6 | onto the CONSOLE. |
|
| |
|
|
|
IMPORTANT PRECAUTIONS INTRODUCTION
SCREW (F) |
CONSOLE TRIM PIECE |
C)Place 3 SCREWS (F) into side of
left CONSOLE TRIM PIECE and tighten.
D)Repeat step C above to secure the right CONSOLE TRIM PIECE to the CONSOLE.
E)Connect power plug to the treadmill and connect the cord to a power outlet. The on/off switch is located next to the power cord. Flip this switch to the ‘ON’ position, so that the switch is lit. You will hear a beep and the console will light up.
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
YOU’RE FINISHED!
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
11
LIMITED WARRANTY
