USER FAVORITE KEYS
The user favorite keys allow up to two programs and program settings to be saved into memory. Using a favorite key enables you to begin your favorite program quickly. To set a user FAVORITE KEY, follow the steps as listed in the “SETTING FAVORITE KEYS” section.
SETTING FAVORITE KEYS:
1)Press and hold the FAVORITE 1 or FAVORITE 2 key for five seconds until you hear three beeps. The LED inside the FAVORITE KEY will be flashing. *NOTE: The FAVORITE KEYS can not be programmed if you are already in a program.
2)Select preferred program using the PROGRAM KEYS and press ENTER. *NOTE: The CUSTOM 1 and 2 PROGRAMS
PROGRAMS (P7-P8) can not be saved into a FAVORITE KEY.
3)For P1, set TIME, INCLINE, and SPEED using the +/- KEYS and press ENTER after setting each value. For programs P2 through P4, set LEVEL and TIME using the +/- KEYS and press ENTER after setting each value.
4)After you have selected your settings, press the FAVORITE KEY to save
the settings or press START to begin your program and your settings will automatically be saved.
USING A FAVORITE KEY:
After you have programmed a FAVORITE KEY as listed in the “SETTING FAVORITE KEYS” section, you may use the favorite key. Press the desired FAVORITE 1 or FAVORITE 2 key then press START to begin the program.
*NOTE: The FAVORITE 1 and FAVORITE 2 keys may only be used before starting a program. The keys will not function while in a program.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
21
LIMITED WARRANTY
