ASSEMBLY STEP 2
INTRODUCTION
1
3
2
NOTE: There is no hardware bag for this step.
LOCK LATCH |
IMPORTANT PRECAUTIONS
ASSEMBLY
A)Lift the running deck until lock latch on side of treadmill is fully engaged.
B)Remove console from box and place out of the way.
C)Lower the treadmill running deck from the folded position by stepping on LOCK LATCH on the bottom left side of the deck.
ASSEMBLY STEP 3
BEFORE YOU BEGIN
HARDWARE BAG 3 CONTENTS :
SCREW (C) 12 mm Qty: 2
A)Open HARDWARE BAG 3.
B)Slide left ROLLER END CAP onto MAIN FRAME and attach with SCREW (C).
TREADMILL OPERATION
C) Repeat on other side.
ROLLER END CAP
SCREW (C)
MAIN FRAME
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
