BEFORE
YOU BEGIN
6
INTRODUCTION IMPORTANT
PRECAUTIONS ASSEMBLY BEFORE
YOU BEGIN ELLIPTICAL
OPERATION LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN ASSEMBLY
7
INTRODUCTION
IMPORTANT
PRECAUTIONS
ELLIPTICAL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
TOOLS INCLUDED PARTS INCLUDED
c 5mm L Wrench
c 5mm T Wrench
c Phillips Screw Driver
c 13/15mm Flat Wrench
c 1 Console
c 1 Console Mast
c 2 Upper Handlebars
c 2 Lower Handlebars
c 2 Lower Link Arms
c 1 Top Cover
c 1 HORIZON FITNESS
12-volt Power Supply
CONSOLE
UPPER HANDLEBAR
MAIN FRAME
LOWER HANDLEBAR
LOWER LINK ARM
ELBOW COVER
FRONT STABILIZER TUBE
FAN
GRIP PULSE
CONSOLE MAST
TOP COVER
PIVOTING FOOT PAD
WHEEL COVER
c 2 Handlebar Cover Sets
c 5 Hardware Bags
c 2 Elbow Cover Sets
c Water Bottle Holder
c 2 Stabilizer Wheels
c 2 Middle Stabilizer Caps
HANDLEBAR COVER
If you have questions or if there are any missing parts, contact 1-800-4-MY-HOME®.
Further contact information is located on the back cover of this manual.
For a complete exploded diagram, see Quick Start and Parts Guide (included in User’s Guide bag).
TARGETtoner™ GRIPS
WATER BOTTLE HOLDER
STABILIZER WHEEL
PEDAL ARM
LEVELER
MID-STABILIZER
SCREWS (A)
MIDDLE RIGHT
STABILIZER CAP
RIGHT STABILIZER WHEEL
MAIN FRAME
FRONT STABILIZER TUBE
ASSEMBLY STEP 1
A) Open HARDWARE BAG FOR STEP 1.
B) Slide the RIGHT STABILIZER WHEEL into the FRONT STABILIZER TUBE and attach using 1 SCREW (A).
C) Slide the MIDDLE RIGHT STABILIZER CAP into the MID-STABILIZER and attach using 1 SCREW (A).
D) Repeat on other side.
E) Adjust the 2 REAR LEvELERS so the elliptical is level on the floor. Then adjust the
2 MIDDLE STABILIZER CAP LEvELERS so they are snug with the floor.
SCREW (A)
10 mm
Qty: 4
HARDWARE BAG FOR STEP 1 CONTENTS :
LOCK ADJUSTMENT
ADJUST HEIGHT
SXE7.7_Rev.1.6.indd 6-7 8/16/07 11:01:01 AM