INTRODUCTION IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

PRE - ASSEMBLY

DO NOT ATTEMPT TO LIFT THE TREADMILL!* Do not move or lift treadmill

WARNING from packaging until specified to do so in the assembly instructions. Failure to do so may result in injury! Remove plastic wrap from console masts.

Note: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.

A S S E M B LY STEP 1

HARDWARE BAG 1 CONTENTS :

BOLT (A)

FLAT WASHER (B)

TEFLON WASHER (C)

 

 

15 mm

20 mm

18 mm

 

Qty: 1

Qty: 1

Qty: 1

 

BOLT (D)

FLAT WASHER (E)

WAVY WASHER (F)

 

Qty: 1

27 mm

29 mm

 

 

Qty: 1

Qty: 1

MAIN FRAME

LEFT CONSOLE MAST

WAVY WASHER (F)

FLAT WASHER (E)

A S S E M B LY STEP 2

HARDWARE BAG 2 CONTENTS :

 

FLAT WASHER (E)

WAVY WASHER (F)

BOLT (D)

27 mm

29 mm

Qty: 1

Qty: 1

Qty: 1

 

 

 

 

 

RIGHT CONSOLE MAST

LEAD WIRE

MAIN FRAME

 

 

WAVY WASHER (F)

FLAT WASHER (E)

 

RIGHT CONSOLE MAST

 

 

 

CONSOLE CABLE

 

 

BOLT (D)

 

 

 

 

 

 

RIGHT LINKAGE ARM

ELEVATION FRAME

CONSOLE CABLE

PRE-ATTACHED BOLT

 

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE

BOLT (D)

 

LEFT LINKAGE ARM

 

BOLT (A)

 

FLAT WASHER (B)

 

TEFLON WASHER (C)

ELEVATION FRAME

A

Open HARDWARE BAG 1.

B

Cut banding straps. Do not move or lift treadmill from packaging.

C

Move left linkage arm into position. Insert 1 bolt (A) and 1 FLAT WASHER (B) into left

 

linkage arm followed by 1 teflon washer (C) and attach to elevation frame.

D

Lift left console mast into upright position. Be sure to hold the console mast firmly, as

 

it will not stay in the upright position on its own.

E

Insert 1 bolt (D) and 1 FLAT washer (E) through left console mast followed by

APull LEAD WIRE through RIGHT CONSOLE MAST. After pulling the lead wire through the mast, the top of the console cable should be located at the top of the mast. Detach and discard lead wire.

BOpen HARDWARE BAG 2.

CMove right linkage arm into position and attach to

ELEVATION FRAME.

Note: While holding RIGHT CONSOLE MAST in the upright position, tighten PRE-ATTACHED BOLT using T-wrench to attach RIGHT LINKAGE ARM.

DInsert 1 bolt (D) and 1 FLAT washer (E) through RIGHT console mast followed by 1 WAVY washer (F) and attach to MAIN FRAME.

ELift the running deck until lock latch on side of treadmill is fully engaged.

FRemove console from box and place out of the way.

*Note: If you have attempted to move the treadmill from the box and the machine has sprung open and cannot be assembled, refer to the troubleshooting section in order to restore the treadmill to its proper position.

1

3

2

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

LIMITED

WARRANTY



1 WAVY washer (F) and attach to MAIN FRAME.

GLower the treadmill running deck from the folded position by stepping on LOCK LATCH on lower right side.



LIMITED WARRANTY

T500_Treadmill_Rev.1.7.indd 8-9

4/23/07 10:08:13 AM

Page 5
Image 5
Horizon Fitness T500 manual Open Hardware BAG, It will not stay in the upright position on its own, Elevation Frame

T500 specifications

The Horizon Fitness T500 is a well-rounded treadmill designed to cater to both beginners and seasoned runners. This treadmill is known for its robust construction, user-friendly features, and innovative technology, making it a suitable addition to any home gym.

One of the standout features of the T500 is its powerful motor. The treadmill is equipped with a 2.5 CHP (Continuous Horsepower) motor that delivers a smooth and consistent performance, allowing users to run at speeds up to 10 miles per hour. This motor is also built for longevity, ensuring that it can handle regular use without losing efficiency.

The T500 boasts a spacious running surface, measuring 20 inches by 55 inches. This generous size provides ample room for users to run or walk comfortably, reducing the risk of accidents during workouts. The treadmill's deck is cushioned, offering a comfortable running experience that minimizes impact on joints, which is particularly beneficial for those who engage in regular cardiovascular exercise.

In terms of technology, the Horizon Fitness T500 is equipped with Bluetooth connectivity, allowing users to sync their devices to the treadmill. This feature enables users to track their workouts through various fitness apps, making it easier to monitor progress and stay motivated. Additionally, the T500 includes integrated speakers and a tablet holder, providing users with entertainment options while exercising.

Another noteworthy characteristic is the T500's adjustable incline feature. Users can customize their workouts with a maximum incline of 10 percent, allowing for varied training intensities and targeting different muscle groups. This feature is particularly appealing for those looking to simulate hill running or increase the caloric burn during their sessions.

The console of the T500 is intuitive and easy to navigate, featuring quick-access buttons for speed and incline adjustments, as well as pre-set workout programs that cater to different fitness levels and goals. The large display provides essential workout statistics, including time, distance, speed, calories burned, and heart rate, ensuring users have all the information they need at their fingertips.

In conclusion, the Horizon Fitness T500 treadmill combines powerful performance, user-friendly technology, and adaptable features, making it a fantastic choice for anyone looking to enhance their fitness routine at home. Whether you're walking, jogging, or sprinting, the T500 is designed to meet diverse workout needs while providing comfort and durability.