2)Disconnect the pump suction hose from the plastic pipe.
3)Disconnect the drain pipe from the plastic pipe.
Pump |
| Drain |
| |
Suction |
|
| ||
| Pipe |
| ||
Hose | 2 | 3 | ||
|
4)Disconnect the float connection hose from the plastic pipe.
5)Disconnect the tank drain hose from the tank. Although the tank can be removed at this point, do not remove it yet because the bin control is taped to the tank.
Float Connection Hose | Tank Drain Hose |
4 | 5 |
CAUTION
The bin control lead is routed through the back of the icemaker. If care is not taken when removing the tank, the lead could be severed.
6)Pull out the tank only as far as shown in 6.
7)Remove the cube guide, then remove the bin control.
8)Being careful not to pull the bin control lead, remove the tank completely from the icemaker.
9)Remove the remaining pieces of tape from the tank and leave the tank out of the machine for now.
Bin Control
Lead
6
14
