Hoshizaki ROX-20TA-U service manual Service Diagnosis, e Cartridge Filter No

The water softener also needs salt for regeneration. Always add a proper amount of salt into the water softener. Give the user sufficient instructions to add salt periodically.

[e] Cartridge Filter [No. 16]

Replace the cartridge filter when the pressure gauge readings on the primary side of the water softener and on the secondary side of the cartridge filter differ by 0.1MPa (1.0kgf/cm2) or more.

2. SERVICE DIAGNOSIS

When the unit shuts down with the Service Call Lamp lighting:

Lamp	Code	Problem	Check	Possible Cause	Remedy
Service	E11	After water valve	Water Supply	Cut off.	Recover.
Call		opens, flow rate
			Water Outlet
		sensor does not		Blocked.	Unblock.
		detect water flow
			Connecting Hose
		for 3 sec.		Crushed or bent.	Release stress.
			Alkaline Water Line	Scaled up.	Clean.
			Flow Switching Valve	Clogged.	Unclog.
			Water Valve	Clogged.	Unclog.
				Connector in bad	Improve contact.
				contact.
				Defective.	Repair or replace.
			Flow Rate Sensor	Clogged.	Unclog.
				Connector in bad	Improve contact.
				contact.
				Defective.	Repair or replace.
			Programmable	Water valve output	Repair or replace.
			Controller	contact defective.
				Flow rate sensor	Repair or replace.
				input defective.
	E14	After water valve	Water Valve	Clogged.	Unclog.
		closes, flow rate
		sensor detects	Flow Rate Sensor	Defective.	Repair or replace.
		water flow for 3
		sec.
Service	E42	Metering pump	Salt Water Tank	Salt water too thin.	Thicken.
Call		stroke speed
		exceeds 360spm	Set Voltage	Too low.	Raise.
		for 60 sec.
			Set Amperage	Too high.	Reduce.

U8AA5540012 31