Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Pozi Wash Head No. 6 x 15mm screws.

40

Page 39 Page 41
Page 40
Image 40
Hotpoint DD77 DT77 manual General, Ventilation, Final Installation, List of loose items
Page 39 Page 41

DD77 DT77 specifications

The Hotpoint DD77 DT77 is a cutting-edge appliance designed to meet the diverse needs of modern households. Known for its commitment to efficiency and innovation, Hotpoint has integrated a range of features and technologies into this model, making it a popular choice among consumers.

One of the standout characteristics of the DD77 DT77 is its impressive energy efficiency. It boasts a high energy rating, ensuring that it not only performs well but also helps reduce utility bills. This model is equipped with advanced energy-saving technologies, which adjust power consumption based on usage patterns, promoting sustainable practices in everyday life.

The DD77 DT77 offers a spacious interior, allowing users to store a variety of food items without compromising organization. The appliance features adjustable shelving, enabling customization according to individual storage needs. Additionally, the model is equipped with a multi-air flow system that ensures even distribution of cold air throughout the fridge, keeping food fresher for longer.

Another notable technology included in the DD77 DT77 is the innovative No Frost feature. This eliminates the need for manual defrosting by preventing the build-up of ice inside the freezer compartment. It not only saves time but also maintains optimal storage conditions for frozen foods.

Safety is another key aspect of the DD77 DT77. It comes with a child lock function, ensuring that young children are unable to access the appliance without adult supervision. Furthermore, the model incorporates advanced temperature control systems that monitor and adjust the internal environment to preserve food quality.

The Hotpoint DD77 DT77 is designed with an elegant aesthetic that fits seamlessly into any kitchen décor. From sleek finishes to intuitive controls, every aspect is meticulously crafted to enhance the user experience.

Overall, the Hotpoint DD77 DT77 combines practicality, style, and advanced technology, making it an ideal choice for families and individuals seeking a reliable and efficient appliance. With its array of features, this refrigerator stands out as a comprehensive solution for modern refrigeration needs, ensuring that food is stored safely and efficiently.
Top Page Image Contents