Internal Modem Installation with Windows 95

Plug and Play Installation

This modem’s factory default setting is “Plug and Play” operation. If you are using the Windows 95 environment, the COM port and IRQ will automatically be set to Windows as the environment. Since your new U.S. Robotics modem is a “Plug and Play” device, Windows 95 may be able to detect your modem automatically after you plug it into your computer. The operating system should do all the work of recognising the modem for you.

How to Prepare for Plug and Play Installation

1.Touch an unpainted metal part of your computer (the back is usually unpainted) to discharge static electricity. Static can damage your modem.

2.Take the modem out of its plastic bag.

5.3.Find the jumper shunts (small black plastic pieces) on the COM (serial) port and IRQ jumper pins on your modem. They should be in roughly the area indicated in the following illustration.

56K Voice Faxmodem Internal - User’s Guide

7

Page 13
Image 13
3Com 1.024.1644-00 manual How to Prepare for Plug and Play Installation