| Technical Reference | |
+FTH=n | Transmits data framed in the HDLC protocol using the | |
| modulation specified by n.(n = 3, 24, 48, 72, 96, 97, 98, | |
| 121, 22, 145, or 146) | |
| Note: See the “Screen Messages” table at the end of | |
| this section for an explanation of messages that appear | |
| in response to this command. | |
+FRH=n | Receives data framed in the HDLC protocol using the | |
| modulation specified by n.(n = 3, 24, 48, 72, 96, 97, 98, | |
| 121, 122, 145, or 146) | |
| Note: See the “Screen Messages” table at the end of | |
| this section for an explanation of messages that appear | |
| in response to this command. | |
|
| Screen Messages |
Displayed | Displayed |
|
as a number | in words | Description |
0 | OK | The previous command has been |
|
| processed successfully. |
1 | CONNECT | The modem has just connected to |
|
| another modem. |
2 | RING | Reports the receipt of a network |
| altering ring. |
|
3 | NO CARRIER | No carrier is being received from the |
|
| modem. |
4 | ERROR | The previous command line has not |
|
| been recognized or was completed |
|
| abnormally. |
5 | NO DIAL | (Optional) Dial tone was not received |
| TONE | within the |
6 | BUSY | (Optional) A busy signal was deleted. |
64 | CONNECT/ | (Optional) The modem has established |
| FAX | a fax connection. This response is used |
|
| only when the fax mode is selected. |
73
