Software Installation
Refer to your software manual for the specific installation instructions. The software’s installation program will ask you questions about the modem you are using. You may need the following information when installing a communications software package.
Type of Modem
Most voice communications software programs will ask you to select the type of modem you are using. Select a U.S. Robotics high speed modem. If that selection is not listed, pick Courier Dual Standard, V.32bis, or V.34.
Initialisation String
For hardware flow control, a fixed serial port rate, and full result codes, type: AT&F1 and then press ENTER.
If you must use software flow control, type: AT&F2 and then press
ENTER.
Flow Control
For hardware flow control (highly recommended), select RTS/CTS.
For software flow control, select XON/XOFF.
You may need to disable the flow control (hardware or software) that you are not using.
Congratulations!
You are now ready to start using your
3Com U.S. Robotics modem.
56K Voice Faxmodem Internal - User’s Guide | 31 |
