Internal Modem Installation with Windows 95
56K Voice Faxmodem Internal - User’s Guide 8
4. When doing a “Plug and Play” installation, the jumper shunts should
be placed so that they are hanging from single jumper pins rather than
on pairs of pins. Move your jumper shunts so they are hanging as in
the diagram.
If you need to move the jumper shunts, grasp them with tweezers or
needle-nosed pliers. DO NOT grasp too firmly, however, or you may crush
the jumper shunts. If a jumper shunt seems stuck, try gently rocking it
back and forth as you lift.
How to Insert the Modem into the Computer 1. Before installing your modem, write down your modem's serial number.
The serial number is on the white label under the bar code on the
modem and on the outside of the box.
Serial Number_______________________
Before you unplug any cords, label them or make a sketch of how they
are connected. This can be helpful when you plug them back in later.
2. Turn off your computer and unplug it from the electrical outlet.
2.3.Unplug any peripheral devices (printer, monitor, keyboard, mouse,
etc.) from the computer.
CAUTION: To avoid risk of electric shock, make sure your computer
and all peripheral devices are turned off and unplugged from electrical
outlets.