HP 110c-1147NR, 110c-1150EB, 110c-1130EK, 110c-1100DX, 110c-1105DX manual

Models: 110c-1105DX 110c-1130EK 110c-1150EB 110c-1100DX 110c-1147NR

1 155
Download 155 pages 38 Kb
Page 68
Image 68

4.Turn the device right-side up, with the front toward you.

5.Open the device as far as possible.

6.Remove the 8 Phillips PM2.5×7.0 screws that secure the top cover to the base enclosure.

7.Lift the inside edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest against the display assembly (2) at an angle.

8.Release the ZIF connector (1) to which the TouchPad button board cable is connected.

58 Chapter 4 Removal and replacement procedures

Page 68
Image 68
HP 110c-1147NR, 110c-1150EB, 110c-1130EK, 110c-1100DX, 110c-1105DX manual