HP 110c-1147NR, 110c-1150EB, 110c-1130EK manual Description Spare part number Fan 537613-001

Fan

Description	Spare part number
Fan	537613-001

NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the device.

Before removing the fan, follow these steps:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device.

4.Remove the battery (see Battery on page 44).

5.If your device has WWAN capability, remove the SIM (see SIM on page 45).

6.Remove the following components:

a.Keyboard (see Keyboard on page 48)

b.Hard drive or solid-state drive (see Mass storage devices on page 54)

c.Top cover (see Top cover on page 57)

Remove the fan:

1.Disconnect the fan cable (1).

2.Remove the 2 Phillips PM2.5×5.0 screws (2) that secure the fan to the base enclosure.

68 Chapter 4 Removal and replacement procedures