HP 110 Set the number of copies, Shift the side margins, Change settings for all future copy jobs

Cam.book Page 17 Friday, February 25, 2000 11:32 AM

HP Color Copier

Set the number of copies

Use any of the following to set the number of copies.

•Press Number of Copies repeatedly to increase the number of copies to make.

•With Number of Copies visible on the front-panel display, press the plus (+) or minus (–) button to increase or decrease the number of copies to make. If you press and hold the plus (+) or minus (–) button, the number changes first in increments of one, and then in increments of five.

•With Number of Copies visible on the front-panel display, use the keypad to enter the desired number.

Shift the side margins

Use Margin Shift to move the information on the copy to the left or right for easier binding.

1Press Special Features until Margin Shift appears.

2Choose one of the following to adjust the direction and level of shift.

•To move the copied image to the left, press .

•To move the copied image to the right, press .

A filled circle indicates the selected state.

3Use the keypad to adjust the reduction/enlargement percentage if necessary.

When working with Margin Shift, use the keypad to adjust the percentage; the and keys only work to adjust the margin shift in this case.

4Press ENTER to use the setting you selected.

Change settings for all future copy jobs

You can save the copy settings you use most often by setting them as the default settings.

1Using the buttons on the front panel, change the settings that you want to save.

2Press Menu.

3Press 1, and then press 5.

Your settings are saved. Current settings are indicated by a filled circle. Default settings have no special indicator.

Restore the factory default settings

Your unit lets you restore the original copy settings to what they were when you purchased it.

1Press Menu.

2Press 1, and then press 6.

The factory default settings are restored.

Chapter 4—Use the copy features 17