HP 110 Set the paper type, Change the paper size, Recommended paper-type settings for copying

Cam.book Page 9 Friday, February 25, 2000 11:32 AM

HP Color Copier

•HP Iron-On T-Shirt Transfers: Flatten the transfer sheet completely before using it; do not load curled sheets. (To prevent curling, keep transfer sheets sealed in the original package until just before using.) Manually feed one sheet at a time, with the unprinted side facing down (the blue stripe faces up).

•HP Restickable Inkjet Stickers: Place the sheets in the input tray, print-side (sticker- side) down.

Legal-size paper

Even though the paper-length adjuster is fully extended, make sure that the input tray itself is pushed all the way in.

Set the paper type

After you have loaded paper or film in the unit, tell it what type of paper is loaded. Change this setting whenever you change the type of paper or film.

1On the front panel, press Paper Type.

2Press until the appropriate type appears.

3Press ENTER to choose the displayed paper type.

Recommended paper-type settings for copying

These settings are set using the Paper Type button on the front panel.

For	Use
Copier paper or letterhead	Plain Paper
HP Bright White Inkjet Paper	Plain Paper
HP Premium Inkjet Transparency Film	Transparency
HP Premium Inkjet Rapid-Dry Transparency Film	RapidDry Trans
HP Premium Photo Paper	Photo Paper
HP Premium Inkjet Paper	Premium Inkjet
HP Premium Inkjet Heavyweight Paper	Premium Inkjet
HP Iron-On T-Shirt Transfers	Iron-On
HP Premium Inkjet Brochure Paper (glossy)	Brochure Glossy
HP Premium Inkjet Brochure Paper (matte)	Brochure Matte

Change the paper size

The unit lets you change the paper size for copying. Your change remains in effect until you change it again. To switch to a different paper size, do the following:

1On the front panel, press Menu.

2Press 1, and then press 1 again.

3Press until the desired paper size appears, and then press ENTER to select it.

Chapter 3—Load paper or transparency film, or load originals 9