Promise Technology EX8650A Silencing the Buzzer, Making Buzzer Settings, Testing the Buzzer

Chapter 5: Management with WebPAM PRO

3.Click the Controller icon.

4.Click the Battery tab in Management View.

In normal operation, the operational status of the battery shows Fully Charged with a Reserve Capacity of 100%. If the battery is constantly recharging, its reserve capacity drops significantly, or the battery remains discharged, replace the battery. Also see “Viewing Enclosure Information” on page 121.

Silencing the Buzzer

To silence the buzzer for the current event:

1.Click the Subsystem icon in Tree View.

2.Click the Controllers icon.

3.Click the Controller icon.

4.Click the Buzzer tab in Management View.

5.Click the Mute button.

The buzzer goes silent but will sound again for future events.

Making Buzzer Settings

To make buzzer settings:

1.Click the Subsystem icon in Tree View.

2.Click the Controllers icon.

3.Click the Controller icon.

4.From the dropdown menu on the Buzzer tab, choose Settings.

5.Check the Enable Buzzer box to enable the buzzer. Uncheck the box to disable the buzzer.

6.Click the Submit button

The changes take effect immediately.

Testing the Buzzer

You must enable the buzzer before you can test it. See “Making Buzzer Settings,” above.

To test the buzzer:

1.Click the Subsystem icon in Tree View.

2.Click the Controllers icon.

3.Click the Controller icon.

119