Promise Technology EX4650A, EX8650A user manual Existing System

SuperTrak EX Series User Manual

Existing System

After installing the SuperTrak EX Series RAID Controller card and rebooting your system, Windows 2000 setup will show a “New Hardware Found” dialog box. Under Windows 2000, “PCI Mass Storage Controller” will be displayed.

1.Choose Add New Hardware Wizard from the list, and then press Enter.

2.Choose Add/Troubleshoot a device and click Next. The new hardware wizard will show device list

3.Choose Mass Storage controller and click Next. At the following screen click Finish.

4.Choose Display a list the known drivers for this device so that I can choose a specific driver then click Next.

5.When the Windows 2000 supported SCSI adapter drivers list appears, click Have disk.

6.Insert the SuperTrak driver diskette in drive A:\.

7.Type A:\Win2000 in the text box. Click OK.

8.Choose Promise SuperTrak EX [4650, 8650] (tm) Controller from the list that appears on screen, then click Next.

9.Click Yes to confirm continue the installation and copy the driver to system.

10.Remove the diskette and click Finish to restart the system. Windows 2000 will then restart for the driver installation to take effect.

Confirming Driver Installation

1.Right-click the My Computer icon and choose Manage from the popup menu.

2.From the left panel, choose Device Manager.

3.Click the + in front of SCSI controllers. “Promise SuperTrak EX [4650, 8650] (tm) Controller” and “Promise Raid Console” should appear.

50