Promise Technology EX4650A, EX8650A user manual Installing the SuperTrak Card

SuperTrak EX Series User Manual

Note

The SuperTrak EX Controller cards are PCI Plug-n-Play (PnP) devices. No changes are necessary in the motherboard CMOS or BIOS Setup for resources or drive types in most applications.

Installing the SuperTrak Card

The SuperTrak EX Controller card fits into any available 3.3-volt PCI-Express x8 slot. You can also plug the SuperTrak card into a PCI-Express x16 slot.

1.Remove the cover of your system.

2.Remove the inside slot cover of an available PCI-Express slot on the motherboard.

3.Install the SuperTrak card into the open PCI-Express slot.

4.Fasten the SuperTrak card bracket to the system case.

5.Attach one end of a SAS multi-lane cable to a SAS port on the SuperTrak card.

See Figures 1 through 4.

8