Promise Technology EX8650A, EX4650 Setting up WebPAM PRO, Click the Add Subsystem/Host tab

Chapter 2: Installation

Setting up WebPAM PRO

The first time you use WebPAM PRO, you must add the Host PC so that WebPAM PRO will recognize it. You only need to perform this procedure once.

To add the Host PC:

1.In the Tree, click the Subsystem/Host Management icon. See Figure 25.

Figure 25. WebPAM PRO initial login screen

Click the Subsystem/Host Management icon

2.Click the Add Subsystem/Host tab.

3.In the Subsystem/Host Port IP address field, type the IP address of the Host PC where you installed the SuperTrak EX Controller card.

If you are working at the same Host PC where the SuperTrak card is installed, you can also type 127.0.0.1 in the IP address field.

Entries such as localhost or the Host PC’s network name do not work for this function.

39