Maintenance & Service Guide

Presario 1660 Model

MSG Index Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations

Service Considerations

Listed below are some of the considerations that you should keep in mind during the disassembly and reassembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:

Compaq screwdriver kit (Spare Part No. 161946-001)

Torx T-9 screwdriver

3/16-inch and 5mm nut drivers (for screwlocks and standoffs)

Small, standard screwdriver

Small, Phillips screwdriver

Diagnostics software

Screws

The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.

As each subassembly is removed from the computer, IMPORTANT: it should be placed away from the work area to

prevent damage.

Return to Removal & Replacement Procedures

Page 35
Image 35
HP 1660 manual Service Considerations