The product IP address displays on the product control panel. If that feature is disabled, the IP address is documented on a configuration page. To view and print a configuration page, follow these steps on the product control panel.
1.At the product control panel, touch the Network button. The IP address is listed on the control panel. To print a report, touch the Report button
At the product control panel, touch the Setup button, then touch the Reports button, then touch the Configuration Report.
2.Find the IP address on the configuration page.
Figure
HP LASERJET 200 COLOR MFP M275NW
Config Report
|
|
|
| Product Settings |
|
Product Name | = HP LaserJet 200 color | Device Description | = HP LaserJet 200 color | ||
|
| MFP M275nw |
| MFP M275nw | |
Formatted Number | = T00000PS | Language | = English | ||
Serial Number | = XXXXXXXXX | Asset Number | = | ||
Service ID | = | 00000 |
| Company Name | = |
Firmware DateCode | = | 20110628_0020 Phoenix Firmware | Contact Person | = | |
Smart Install SW Version | = | 06/23/2010.1.0.11165.107 | Product Security | = Off | |
Location | = USA | HP Smart Install | = Enabled | ||
Device Location | = |
|
| Wired HW Address | = XX:XX:XX:XX:XX:XX |
ADF Installed | = Yes | Wireless HW Address | = XX:XX:XX:XX:XX:XX | ||
Max Monochrome Print Quality = | 600x8 | Network In Use | = None | ||
Max Color Print Quality | = | ImageREt 2400 | Host Name | = XXXXXXXXX | |
Controller Number | = | 40 |
| IPv4 Status | = 192.168.0.10 |
|
|
|
| IPv6 Status | = XXXX::XXXX:XXXX:XXXX:XXXX |
Memory
Total Memory | = 128 MBytes |
Available Memory | = 45.28 MBytes |
Installed Personalities and Options
PCL6 | = (20040201) |
URF | = (20040201) |
PCL | = (20040201) |
= (20040201) | |
PS | = (20040201) |
88 | Chapter 2 Windows® software description and installation | ENWW |