17.When the installation completes, the Summary screen appears. Click the OK button to close the installer program.
Figure
Setup instructions
If you clicked the Skip Setup button during the initial installation process, you must set up the product manually.
This section contains information about the following topics:
●Troubleshoot the product setup
Set up a printer with a Mac
Complete these steps after completing the
1.If you are installing the product using a USB connection, verify the USB cable is connected between the product and the computer. Turn on the product. If you are installing using a network connection, verify that the network cable is connected to the product and that the product is on.
2.In the Applications folder (in the Finder utility), open the System Preferences folder, and then open Printer & Fax (or Print & Scan in Mac OS X v10.7).
ENWW | Install the Mac |