The Resizing Options group box consists of the following controls:
●Actual size (default)●Print document on●Scale to fit●% of actual sizeActual size
Actual size is the default setting. It prints the document without changing the document size.
Print document on
Click the Print document on option to format the document for one paper size and then print the document on a different paper size, with or without scaling the image to fit the new paper size.
The Print document on control is disabled by either of the following conditions:
●The % of actual size value is not 100.
●The Pages per sheet value (on the Finishing tab) is not 1.
When Print Document On is selected, the
Scale to fit
The Scale to fit option box specifies whether each formatted document page image is scaled to fit the target paper size. By default, Scale to fit is selected when Print document on is selected. If the setting is turned off, then the document page images will not be scaled, and are instead centered at full size on the target paper. If the document size is larger than the target paper size, then the document image is clipped. If it is smaller, then it is centered within the target paper.
When the size for which the document is formatted (that is, the logical size) differs from the target size, the preview image uses a dashed gray line to show the boundaries of the logical page in relation to the target paper size.
% of actual size
The % of actual size option provides a slider bar and input box to use for scaling the percentage setting. The default setting in the entry box is 100% of actual size. Actual size is defined as the paper size that is selected within the driver or what the driver receives from the software program (if the software program does not negotiate the paper size with the driver). The driver scales the page by the appropriate factor and sends it to the product.
ENWW | HP LaserJet software components for Windows® | 37 |