Paper size

The width and height values can be changed by typing numeric strings into the edit boxes in the Paper Size group box.

Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry.

If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are validated when the focus has changed.

The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement units.

Units

To change measurement units, click one of the options in the Units group box (either Inches or Millimeters).

Custom width and height control limits

The minimum paper size for the product is 76 x 127 mm (3 x 5 in) and the maximum is 215.90 x 355.60 mm (8.50 x 14.00 in).

Paper source

The Paper source setting specifies the source tray to use for printing a document. The list of source trays depends on the product accessories that are installed. Any optional source trays that are installed through the Device Settings tab also appear here.

The Paper source drop-down menu can contain the following options, depending on what has been installed on the product:

●Automatically select

●Printer auto select

●Manual Feed in Tray 1

●Tray 1

The default setting is Automatically Select. When this setting is selected, the product uses the source tray that supports the paper size that you have selected. If you select a source tray other than Automatically select, make sure that the correct paper size is loaded in the source tray.

Paper type

The Paper type drop-down menu shows the first few paper types that the product supports and an entry for More. Clicking More opens the Type Is dialog box. Click the + next to Type Is and its subcategories to view all of the paper types that the product supports. For detailed information on the supported paper types, see the user guide.

ENWW

HP LaserJet software components for Windows®

33