Troubleshooting

Local Area Network (LAN) Problems

If the Built-In Network Adapter Does Not Connect to the LAN

Check all cables and connections. Try connecting at a different network station, if available.

Make sure the LAN cable is Category 3, 4, or 5 for 10Base-T operation, or Category 5 for 100Base-TX operation. Maximum cable length is (100 meters) 330 feet.

Select Start > Help and Support > and use the Networking troubleshooter.

Open the hardware Device Manager:

1.Select Start > Control Panel > Performance and Maintenance > System.

2.If the network interface is disabled, try to enable it. If it has a conflict, try disabling another device.

If You Cannot Browse the Network Neighborhood or My Network Places

Select Start > Search > Notebooks or People to look for a notebook.

If You Cannot Log In to Netware Servers

If a Netware server is using IPX/SPX protocol, you may need to force your frame type to match the server frame type. Check with your network administrator.

If a Network Connection Responds Slowly

If your network connection uses a proxy server, try enabling the option for bypassing the proxy server for local addresses. You can do this in Control Panel under your network connection properties.

6–8

Reference Guide

Page 72
Image 72
HP 2204US, 2200, 2209CL, 2206US Local Area Network LAN Problems, If the Built-In Network Adapter Does Not Connect to the LAN