Removal and Replacement Procedures

8.Flex the right side of the base enclosure near the audio jacks 1 until the jacks clear the base enclosure.

9.Lift the rear edge of the system board and swing it up 2 until the board rests at a 45-degree angle.

10.Slide the system board away from the base enclosure at an angle 3.

Removing the System Board

Reverse the above procedure to install the system board.

5–48

Maintenance and Service Guide

Page 136
Image 136
HP 2250AP, 2200, 2209CL, 2206US, 2206AP, 2206AL, 2204US, 2204AL, 2204AS Reverse the above procedure to install the system board