Selecting from the Security Menu

Troubleshooting

	Table 2-2
	Security Menu

Select	To Do This

Administrator password	Enter, change, or delete an HP Administrator
	password.

Power-on password	Enter, change, or delete a power-on password.

Password options	■ Enable/Disable stringent security.
	■ Enable/Disable required password on restart.

DriveLock passwords	Enable/disable DriveLock; change a DriveLock
	user or master password.
	✎ DriveLock Settings are accessible only
	when you enter Computer Setup by turning
	on (not restarting) the notebook.

Smart Card Security	Enable/disable power-on support for smart cards.
	✎ This feature is supported by select smart
	card readers only.

Embedded Security	■ Enable/Disable the embedded security chip.
	■ Restore embedded security chip to factory
	settings.
	■ Enable/Disable power-on authentication
	support.
	■ Enable/Disable automatic DriveLock.
	■ Reset power-on authentication credential
	✎ Embedded Security settings are accessible
	only if the notebook is equipped with an
	embedded security chip.

Device security	■ Enable/Disable devices in the system.
	■ Enable NIC for inclusion in MultiBoot.

System IDs	Enter user-defined identification values.

2–4	Maintenance and Service Guide