HP 2355v, 2350 manual User Guide 115

Models: 2350 2355v

1 136
Download 136 pages 43.86 Kb
Page 118
Image 118

6Press the On button to turn off the HP all-in-one.

7Unplug the power cord, and then disconnect it from the HP all-in-one. Do not return the power cord with the HP all-in-one.

Warning The replacement HP all-in-one will not be shipped with a power cord.

Store the power cord in a safe place until the replacement HP all-in-one arrives.

8Remove the control panel overlay as follows:

a Make sure the color graphics display is lying flat against the HP all-in-one. b Raise the lid.

c Place your thumb along the groove on the left side of the control panel overlay. Gently remove the control panel overlay from the device as shown below.

Get HP support

9Retain the control panel overlay. Do not return the control panel overlay with the HP all-in- one.

Tip See the Setup Guide that came with your HP all-in-one for instructions on how to attach your control panel overlay.

Warning The replacement HP all-in-one might not come with a control panel overlay. Store your control panel overlay in a safe place, and when the replacement HP all-in-one arrives, reattach your control panel overlay. You must attach your control panel overlay to use the control panel functions on the replacement HP all- in-one.

10If available, pack the HP all-in-one for shipment by using the original packing materials or the packaging materials that came with your exchange device.

User Guide

115

Page 118
Image 118
HP 2355v, 2350 manual User Guide 115