To Eject All Jobs in the Printer

Print all the jobs that the printer has received.

Through this procedure, you can interrupt the receiving of data and empty the buffer. The procedure is explained below.

1.Press the <Online> button when the display shown to the right appears.

Note

•Press the <Online> button to make the printer automatically stop receiving data.

2.Press the <Eject/Set> button. Printing will start.

All the jobs are printed and “Off-line” appears in the display.

Note

•When a parallel interface or USB interface is being used, depending on when the <Online> button is pressed in step 1, data reception may occur in the middle of a job.

In this situation, data after that is recognized as a new job, after the <Eject/Set> button is pressed, and processed like a new job after releasing offline in step 3.

3.Press the <Online> button.

“Ready to print” appears in the display.

Note

•After “Ready to print” appears, data that is being processed as a new job may not be printed correctly if [Print Mode] is set to [Auto] in the common menu.

<Online> button

<Eject/Set> button

<Online> button

121 Using Emulation