HP 3800 manual Security, Set Password

Security

The following illustration and table describe how to use the Security screen.

1

2

3

4

Figure 3-8 Security screen

Table 3-6	Security
Callout	Area on the screen	Information or capability that the area provides
1	Set Password	Set an administrator password to control who can gain access to the EWS
		Settings, and Networking tabs. After the password has been set, users are
		prompted to type a password when they click the Log In link. For more
		information, see Login and logoff.
		To clear a password, remove the characters from the New Password field,
		leave the Verify Password field empty, and click the Apply button.
2	Print Page	Select to make the Print screen available in the Information tab.
3	Display On Device Status	Select the control-panel buttons that you want to appear on the Device
	Page	Status screen (on the Information tab).
4	Direct Ports	Select Disable Direct Ports to block walk-up printing and system access.
		When the setting is selected and applied, USB and IEEE 1284 ports are
		disabled.

Settings tab

ENWW Security 41