8 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter

Microsoft Windows NT 4.0 Workstation

8Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter

Microsoft Windows NT 4.0 Workstation

Connecting to a Novell NetWare 4.11 Server

Requirements

•HP Vectra with Windows NT 4.0 Workstation.

•3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver- sion 5.2.2.

•Driver File: EL59X.SYS, version 1.22

•Microsoft Windows NT 4.0 Workstation media.

•Microsoft Windows NT 4.0 Service Pack 4.

•Novell NetWare 4.11 Server system that supports IPX network protocol.

•Novell IntranetWare Client for Windows NT v4.11b installation media.

Device Configuration

Device Configuration

Vectra Vli8

Vectra VEi7

Vectra VEi8

 

 

 

 

Interrupt

05

05

05

 

 

 

 

I/O Address

300

300

300

 

 

 

 

Procedure

1With the HP Vectra turned off, install the 3COM 3C590 network adapter into a PCI slot.

2Connect network cable media to the 3COM 3C590 network adapter.

3Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information).

4Right-click on the “Network Neighborhood” icon and select “Properties”.

5Click on “Yes” when prompted to install Windows NT Networking.

6Select “Wired to the network” and click on “Next”.

7Click on the “Select from list…” button and then the “Have Disk…” button.