11 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Connecting to a Novell NetWare 4.11 Server
8Click on the “Do Not Detect” button from the “Network Adapter Card Detection” window, and click on the “Continue” button in the following “Network Adapter Card Detection” window.
9From the “Drop Down List”, scroll down and select “<Other> Requires disk from manufacturer”, then click on “Continue”.
10Set the path to “A:\NDIS\WINNT35\” in the “Insert Disk” dialog box, and then insert the 3COM “EtherDisk for the Fast EtherLink and EtherLink III Bus Master Adapters” diskette in the floppy drive and click “OK”.
11Select “3COM Fast Etherlink PCI
12Choose the appropriate network protocols by clicking the check boxes in the “Windows NT Setup” dialog box and click on the “Continue” button (Contact your network administrator if you do not have the required information).
13Press “OK” to continue from “Network Settings” dialog box.
14If applicable, press “OK” to continue from “NWLink IPX/SPX Protocol Configuration” dialog box.
15At the “Domain/Workgroup Settings” dialog box, click on “OK” to accept the default “Workgroup” as your workgroup name.
16To complete the installation, remove the floppy disk, and click on “Restart computer” in the “Windows NT Workstation Networking Setup” dialog box.
17Insert the Novell IntranetWare Client v.4.11 application CD in the CD- ROM drive and execute “Setupnw.exe”.
18Click on the “Continue” button to proceed with the installation of the Novell IntranetWare Client.
19Click on the “Reboot” button to restart the machine for the changes to take effect.
20Install the Windows NT3.51 Service Pack 5 application.
