9

technical information

Additional specifications information can be found in the HP Photo & Imaging Help, in the hp officejet 4100 series section.

physical specifications

height

width

depth

weight (without print

 

 

 

cartridges)

 

 

 

 

with paper trays and ADF closed

 

 

 

 

 

 

7.18 in. (18.24 cm)

16.76 in. (42.58 cm)

8.25 in. (20.96 cm)

7.5 lbs (3.4 kg)

 

 

 

 

with ADF and paper tray extended

 

 

 

 

 

 

10.30 in. (26.15 cm)

16.76 in. (42.58 cm)

18.54 in. (47.09 cm)

7.5 lbs (3.4 kg)

 

 

 

 

power specifications

•Power consumption: 75W maximum

•Source (Input Voltage): 100 to 240 VAC, grounded

•Input Frequency: 50 to 60 Hz

•Current: 1A maximum

regulatory information

Additional regulatory information can be found in the HP Photo & Imaging Help. The information in this section supercedes information in the HP Photo & Imaging Help.

doc statement / déclaration de conformité (Canada)

Le présent appareil numérique n'émet pas de bruit radioélectrique dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

notice to users of the Canadian telephone network

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

Note: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

The REN for this product is 0.3B, based on FCC Part 68 test results.

43