Appendix C
Set up the device with a computerIf you are using the same phone line for sending faxes and for a computer
Back view of the device
1 | Telephone wall jack |
|
|
2 | Use the phone cord supplied in the box with the device to connect to the |
| |
| You might need to connect the supplied phone cord to the adapter |
| provided for your country/region. |
|
|
3 | Computer with modem |
|
|
1.Remove the white plug from the port labeled
2.Find the phone cord that connects from the back of your computer (your computer
3.Using the phone cord supplied in the box with the device, connect one end to your telephone wall jack, then connect the other end to the port labeled
NOTE: You might need to connect the supplied phone cord to the adapter provided for your country/region.
If you do not use the supplied cord to connect from the telephone wall jack to the device, you might not be able to fax successfully. This special phone cord is different from the phone cords you might already have in your home or office.
4.If your modem software is set to receive faxes to your computer automatically, turn off that setting.
NOTE: If you do not turn off the automatic fax reception setting in your modem software, the device will not be able to receive faxes.
5.Turn on the Auto Answer setting.
6.(Optional) Change the Rings to Answer setting to the lowest setting (two rings).
7.Run a fax test.
When the phone rings, the device automatically answers after the number of rings you set in the Rings to Answer setting. The device begins emitting fax reception tones to the sending fax machine and receives the fax.
If you encounter problems setting up the device with optional equipment, contact your local service provider or vendor for further assistance.
184 Additional fax setup