Chapter 5
you are trying to send a fax to another country/region or receive a fax from another country/region, or if you are using a satellite phone connection.
To set the fax error-correction mode
1.Press Setup.
2.Press right arrow 
to select Fax Settings, and then press OK.
3.Press right arrow 
to select Error Correction, and then press OK.
4.Press right arrow 
to select On or Off, and then press OK.
Set the dial type
Use this procedure to set
NOTE: The
To set the dial type
1.Press Setup.
2.Press right arrow 
to select Basic Settings, and then press OK.
3.Press right arrow 
to select Tone or Pulse, and then press OK.
4.Press right arrow 
to select the appropriate option, and then press OK.
Set the redial options
If the device was unable to send a fax because the receiving fax machine did not answer or was busy, the device attempts to redial based on the settings for the
•Busy redial: If this option is turned on, the device redials automatically if it receives a busy signal. The
•No answer redial: If this option is turned on, the device redials automatically if the receiving fax machine does not answer. The
To set the redial options
1.Press Setup.
2.Press right arrow 
to select Fax Settings, and then press OK.
3.Press right arrow 
to select Redial Options, and then press OK.
4.Press right arrow 
to select the appropriate Busy Redial or No Answer Redial options, and then press OK.
Set the fax speed
You can set the fax speed used to communicate between your device and other fax machines when sending and receiving faxes.
54 Fax