Chapter 1
To load media1.Pull out the tray extender.
2.Insert the media
NOTE: Do not load paper while the device is printing.
•Envelopes: Load envelopes with the flaps facing up to the right or the back of the tray. Depending on the type of envelope you are loading, the flap hinge should be on the left or towards the back of the tray.
•Photo paper: If the photo paper has a tab along one edge, make sure the tab is pointing towards the back of the product.
•Transparencies: Insert transparencies with the rough side down and the adhesive strip pointing towards the back of the product.
•
3.Slide the media guides in the tray to adjust them for the media size that you have loaded.
20 Get started