Manuals / Brands / Computer Equipment / Printer / HP / Computer Equipment / Printer

HP LaserJet 5000 Reset, Trafﬁc, Deﬁnition, Attach Type, Attach Type, Insert Mode, Enable Rmon, Enable Modem, Enable Redirects, Table 3-1.Possible Attach Types

1 83

Download 83 pages, 659.28 Kb

Catalyst Stack System Conﬁguration View

Attach Type

This button allows you to change the attachment type of the FDDI connection to the device. Table 3-1shows the possible attachment types. New attach type settings will not take effect until the concentrator is reset.

Table 3-1. Possible Attach Types

Attach Type	Deﬁnition

Other	None of the following.

DualAttach	The ﬁrst FDDI port is conﬁgured as an A port,
	the second as a B port.

SingleAttach	The ﬁrst FDDI port is conﬁgured as an S port,
	the second as an M port.

NullAttach	The ﬁrst two FDDI ports are conﬁgured as M
	ports.

Insert Mode

This button allows you to select the mode for inserting M-ports into the concentrator ring. Possible insertion modes are: Other (none of the following), Standard, Scheduled, and Graceful.

Reset

This button allows you to initiate a reset of the control logic of all modules in the device. The default is Other.

Trafﬁc

Displays the value of the trafﬁc meter, shown as a percentage of bandwidth utilization on the network for the previous polling interval.

Enable Redirects

Allows you to select whether the device is able to send or receive ICMP redirect messages.

Enable Modem

Allows you to select whether this device’s RS-232 port modem control lines are enabled or disabled.

Enable Rmon

Allows you to select whether this SNMP agent supports the RMON MIB.

9032208 E4	Conﬁguration Views
	3-5

Contents

Page Notice Virus Disclaimer Restricted Rights Notice Contents Preface Page Index Page Figures Page Tables Page What Is in This Guide Conventions Related SPECTRUM Documentation Other Related Documentation Page Introduction The Cisco Catalyst 5000/5500 Hubs SPECTRUM Model Type Accessing SPECTRUM Views Getting Started with SPECTRUM for Operator’s Figure 1-1.Using Double-ClickZones to Access SPECTRUM Views SPECTRUM Views refer to the SPECTRUM Views Figure 1-2.Using the Icon Subviews Menu to Access SPECTRUM Views Figure 1-3.Accessing Module-SpeciﬁcSubviews SPECTRUM Views Roadmap Page Device Views Interface Device View Figure 2-1.Interface Device View Interface Icons Interface Icon Interface Label Administrative Status Label Interface Type Label MAC Address Label Interface Address Translation Table Network Information Label Gauge Label Gauge Control Panel Figure 2-3.Gauge Control Panel Gauge Control Panel Gauge Mode Table 2-2.Totals Gauge Mode: Attributes and Corresponding Color Selected Attribute Table 2-3.Rates Gauge Mode: Attributes and Corresponding Color Selected Attribute Gauge Type Gauge Buttons Apply Reset Keep Settings Chassis Device View Figure 2-4.Cisco Catalyst 5000 Chassis Device View * File View Help Module Icons Module Number Label Module Status Label Module Table View Module Versions Port Number Label Port Status Label Port Table View Additional Status Deﬁnitions (Continued) Page Conﬁguration Views Device Conﬁguration View Number of Interfaces Router Redundancy IF Address Translation Reconﬁgure Interface Conﬁguration Table Interface Conﬁguration View Catalyst Stack System Conﬁguration View Attach Type Table 3-1.Possible Attach Types Insert Mode Trafﬁc Enable Redirects Chassis Backplane Power Supplies Fan Alarms Order Catalyst Stack Ports Table Table 3-4.Possible Port Types Port Type Possible Port Types (Continued) Page Event and Alarm Messages Device Events and Alarms Catalyst Switch Events and Alarms (Continued) Page Table 4-1.Catalyst Switch Events and Alarms (Continued) Page Page Application View Common Applications Device Application View Figure 5-1.Device Application View (Icon Mode) Figure 5-2.Device Application View (List Mode) Catalyst Stack Application Table 5-1.Catalyst Stack Application-SpeciﬁcIcon Subviews Menu Selections Menu Selection Bridge/Router Enable Rip Enable IP Frag Enable Spantree Enable Giant Check Enable Unreachables CAM Aging Time CAM Mode IPX SNAP To Ether IPX 8022 To Ether IPX 8023RAW To FDDI BRouter Ports Table Field Deﬁnitions Column Heading Community Strings Community Strings Table 5-3.Community Strings View Access Levels Access Level FDDI Ring Table FDDI Ring SMT Index MAC Table Vendor Table Protocol Table Test Table Port Table Throttle Monitor Information View Source Module Source Port Destination Module Catalyst TFTP Information View TFTP Host File TFTP Transfer Action Types Catalyst Trap Receiver Table Trap Receiver Addr Community Catalyst VLan Table VLan Ports Table VLan Ports Vlan Switch Level Catalyst VLan Manager Selecting a VLan Adding a VLAN Changing a Port’s VLAN Removing a VLAN Discovery Cache Table View Device ID Device Port Platform Capabilities Ethernet Application Symbols Numerics