![](/images/backgrounds/287132/cabletron-systems-5500-users-manual-52952972x1.png)
Device Application View
Catalyst Trap Receiver Table
Catalyst Trap Receiver TableThis table lists the addresses of Network Management Stations that should receive trap messages from the Catalyst Stack Application.
To access the Catalyst Trap Receiver table, do the following:
1.Within the Application view, highlight the CATStackApp icon (icon mode) or model type name (list mode).
2.From the Icon Subviews menu, select Trap Receiver.
The Catalyst Trap Receiver table provides the following information:
The Trap Receiver Table and its corresponding
Type
Displays the status of this entry. Setting this value to “Invalid” removes the corresponding entry from the Trap Receiver Table. To add a new entry to the Trap Receiver Table, set this value to “Valid” for an IP address that is not already in the table.
AddrDisplays the IP address of the Network Management Station receiving the traps.
CommunityDisplays the community string used for trap messages sent to this trap receiver.
Catalyst VLan TableThe Catalyst VLan table provides a list of Virtual LAN entries, which are determined by the LANs within the system. To access the Catalyst VLan table, do the following:
1.Within the Application view, highlight the CATStackApp icon (icon mode) or model type name (list mode).
2.From the Icon Subviews menu, select VLan.
The VLan table view provides the following information:
VLan IndexIdentifies the Virtual LAN associated with this module port.
Spanning TreeIndicates whether the Spanning Tree protocol is enabled for this Virtual LAN. Possible values are Enabled and Disabled.
9032208 E4 | Application View |
|