![](/images/backgrounds/287132/cabletron-systems-5500-users-manual-52952941x1.png)
Device Configuration View
Number of InterfacesDisplays the number of ports for the device.
Router RedundancyThis button allows you to enable (true), or disable (false) redundancy for this interface. By default it is set to be true.
IF Address TranslationThis button accesses the IF Address Translation Table. This table cross- references device IP addresses to device MAC (Ethernet) addresses for selected nodes between networks.
This button allows you to update the Device Configuration view to reflect any changes that have been made to the devices in the chassis.
Interface Configuration TableThis table within the Device Configuration view provides the following configuration information for the device and each port:
Index
Displays the interface or port number.
Description
Provides a description of the interface or port.
Type
Displays the type of hardware interface or port. Some of the possible types are Ethernet, FDDI, T1, PPP, and Reg1822.
BandwidthDisplays the estimated bandwidth of the interface measured in bits per second. For interfaces that do not vary in bandwidth, or for which no accurate estimate can be made, a nominal bandwidth is provided
Physical Address
Displays the physical (MAC) address of the interface or port.
Operation StatusDisplays the current operational state of this interface or port (Up, Down, or Testing).
Admin. StatusDisplays the administrative status for this interface. Possible states are: On, Off, and Testing.
Configuration Views | Cisco Catalyst 5000/5500 Hub |
Management Module Guide |