Device Application View

Discovery Application

Figure 5-4. Add/Remove Buttons

Add Remove

VLAN:

 

 

 

3

 

 

 

 

 

Changing a Port’s VLAN

To select a VLAN to add a port to, highlight the VLAN number icon in the VLAN panel. Double click on the port icon which you would like to add to the VLAN. The port icon will be highlighted to indicate the change. The port counts, next to the VLAN icons, should accurately reflect the number of ports assigned to each VLAN.

Removing a VLAN

To remove a VLAN, make sure there are no ports assigned to the VLAN. Highlight that VLAN’s number icon. Click the “Remove” button. The VLAN will be removed from the VLAN panel.

Discovery Application

This section describes the Discovery Application supported by the cisco Catalyst Hub. The model type name for this application is CiscoCDPApp. Table 5-5describes each of the application-specific Icon Subviews menu selections available for the Discovery Application.

Table 5-5. Catalyst Stack Application-Specific Icon Subviews Menu Selections

Menu Selection

Description

 

 

Cache

Opens the Discovery Cache Table view, described later in

 

this chapter.

 

 

Interfaces

Opens the Interface Discovery Status Table view, described

 

later in this chapter.

 

 

Model Information View

Opens the Model Information view described in the

 

SPECTRUM Views reference.

 

 

Application View

Cisco Catalyst 5000/5500 Hub

5-18

Management Module Guide